How is the "automatic water production" function on the water purifier control panel implemented?
Publish Time: 2024-07-30
The "automatic water production" function on the water purifier control panel is a major embodiment of modern smart home technology. It realizes the intelligent management of the water purifier through precise control systems and sensor technology. The realization of this function mainly depends on the following key elements:
1. Sensor monitoring
The water purifier is equipped with a water level sensor inside, which can monitor the water level in the water tank in real time. When the water level drops below the preset threshold, the sensor will immediately send a signal to the control panel.
2. Control panel processing
After receiving the signal from the sensor, the microprocessor in the control panel will respond quickly. According to the preset program and parameters, the control panel will determine whether the conditions for automatic water production are currently met. If the conditions are met, the control panel will issue a command to start the water production system of the water purifier.
3. Water production system start-up
Under the command of the control panel, the water production system of the water purifier starts working. This system usually includes key components such as booster pumps, filter membranes (such as RO membranes), and water storage tanks. The booster pump pressurizes the tap water and sends it to the filter membrane for filtration to remove impurities, bacteria, viruses and other harmful substances, and finally obtain pure drinking water. The filtered water will be stored in the water tank, waiting for users to use.
4. Automatic stop and protection
When the water level in the water tank reaches the preset upper limit, the water level sensor will send a signal to the control panel again. At this time, the control panel will issue an instruction to shut down the water system to prevent the water tank from overflowing. At the same time, the control panel will also monitor the operating status of the water purifier in real time. Once an abnormal situation is found (such as filter element blockage, circuit failure, etc.), protective measures will be taken immediately and an alarm will be issued to ensure the safety of users and the normal operation of the water purifier.
In summary, the "automatic water production" function on the water purifier control panel is realized through the close cooperation of sensor monitoring, control panel processing, water system startup, automatic stop and protection. The realization of this function not only improves the convenience of using the water purifier, but also ensures that users can get safe and healthy drinking water at any time.
